Crystal Clear Resin & hardner 2:1 - 150 Grams

USAGE

Measure

With gloves on, pour the resin and hardner into a mixing cup, in the ratio 2:1 gms by weight.

Mix

Stir well slowly for at least 2 to 4 Min until the mixture turns completely clear. Try not to incorporate air into the bowl while mixing. Scrape the sides and the bottom to make sure you're being thorough (unmixed material will leave you with sticky spots that just won't cure). Once you mix the resin and hardner, you'll have about 20 to 25 min of working time before the resin thickens and starts to cure.

Pour

After making sure your piece is level, pour Resin over your work. Let the resin run over the edges. You'll notice bubbles will begin to rise to the surface. Most of the bubbles pop on their own; you may use a hot air gun/blow torch over unpapped bubbles if required.

Wait

Resin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky, but you will be able to pour a second coat if necessary. In about 6 hours it will be dry to touch. It will be fully cured in 12 hours at room temperature.

Clean up

To clean your mixing tools, wipe them down with a paper towel before the resin dries.

Quick Summary Details:

• 6 Hr: Dry to touch

• 2:1 gms: Mix Ratio

• 20 Min: Working time

• CRYSTAL CLEAR: Finish

CURING TIME MAY CHANGE DUE TO WEATHER